-
Reed Switch Sensor Module for Arduino
- Sensor and Modules, Acceleration & Rotation Sensor, Force & Pressure Sensor, Sensors
- ₹64.00 (inc. GST)
- Working voltage 3.3V-5 Output format: digital switching output (0 and 1)A fixed bolt holes for easy installation
- Add to cart
-
- Sale!
TCRT5000 Single Channel Line Tracking Sensor Module
- Robotics, Modules, Sensor and Modules, Sensors
- Original price was: ₹79.00.₹69.00Current price is: ₹69.00. (inc. GST)
- Detection Range: 1mm to 8 mm Focus Range: 2.5 mm Driving Ability: > 15 mA Working Voltage: 3.3 V to 5 V Output: digital switch outputs (0 and 1) PCB Size: 3.2 x 1.4 cm
- Add to cart
-
- Sale!
DC24V 20MM 12LED Alloy Air Humidifier Mist Maker Nebulizer
- Modules, Temp, Humidity & Gas Sensor
- Original price was: ₹419.00.₹369.00Current price is: ₹369.00. (inc. GST)
- Plug and Play Device Fully waterproof and Shockproof 1-meter long cable provides ease for connections Universal 5 mm DC Female jack 12 Waterproof LED with 3 colours
- Add to cart
-
Dc Motor 12v 200 Rpm High Torque Electric Micro Speed Geared Motor
- Motors, Motors and Drivers
- ₹149.00 (inc. GST)
- Voltage 12V Speed 200 RPM Torque High Motor Type Electric Gear Ratio Micro geared
- Add to cart
-
PCF8574T I2C I/O Extension Board
- Modules, Communication Module
- ₹129.00 (inc. GST)
- Interface: I2C Operating Voltage: 3-5VDC Ports: 8-bit Parallel Ports Can be used with Arduino and Raspberry Pi
- Add to cart
-
- Out of Stock
TDA 7297 Single IC Amplifier Board with 5 Volt DC Supply amplifier Board
- Amplifiers and Sound Cards, Audio and Video
- ₹249.00 (inc. GST)
- Key features include Integrated circuit TDA7297. Wide supply voltage range (6v -18v). Minimum external components no SVR capacitor, no bootstrap, no boucherot cells. Has internally fixed gain, short circuit protection and thermal overload protection.
- Read more
-
-
50kg Half-bridge Experiments Body Scale Load Cell Sensor
- Force & Pressure Sensor, Sensor and Modules, Sensors
- ₹59.00 (inc. GST)
- Capacity (Kg): 50. Output Sensitivity (mv/v): 1.0±0.1. Nonlinearity (%FS): 0.03. Repeatability (%FS): 0.03. Input Resistance (Ω): 1000. Insulation Resistance (MΩ): ≥5000.
- Add to cart
-
Tilt Switch Sensor Module For Arduino
- Sensor and Modules, Miscellaneous Module, Modules
- ₹39.00 (inc. GST)
- Operating Voltage: 5v DC. This module is Small and Simple to use. Digital switch output (0 & 1) High sensitivity Completes the circuit when the module is tilted LED lights up when tilt switch is activated
- Add to cart
-
- Sale!
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- 3D Printer Parts, Motors and Drivers
- Original price was: ₹589.00.₹549.00Current price is: ₹549.00. (inc. GST)
- H bridge bipolar constant current drive. The biggest 4.0 A Eight kinds of output current are optional. The biggest 32 To subdivide 6 kinds of subdivision modes selectable. Input signal high-speed photoelectric isolation. A total of standard single pulse interface. Offline retention function. The semi-enclosed casing can adapt to a more stringent environment. Provide energy saving half automatic current lock…
- Add to cart
-
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- ESP Boards and Accessories, Development Boards
- ₹149.00 (inc. GST)
- WS2812 Led on board. 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units
- Add to cart
-
- Out of StockSale!
DIY Acrylic Robot Manipulator Mechanical Arm Kit (not-including Servo and Board)
- Robotic Kits, Robot/Drone Parts, Robotics
- Original price was: ₹799.00.₹699.00Current price is: ₹699.00. (inc. GST)
- Material: Acrylic Affordable 4-DOF manipulators. Highly versatile mechanical parts. Wood board laser cutting with precision. Easy to assemble.
- Read more
-
-
9-0-9V 750mA Step Down Center-Tapped Transformer
- Voltage Regulator Modules
- ₹139.00 (inc. GST)
- Output current: 750mA Supply voltage: 220-230VAC Output voltage: 9-0-9VAC (9 0 9 V) Soft Iron Core 750mA Current Drain 9 0 9V 750mA Step Down Center Tapped Transformer
- Add to cart
-
- Sale!
WeMos D1 R2 WiFi ESP8266 Development Board
- ESP Boards and Accessories, Arduino Boards and Accessories, Development Boards
- Original price was: ₹399.00.₹269.00Current price is: ₹269.00. (inc. GST)
- Microcontroller ESP8266 Digital I/O Pins 11 Analog I/O Pins 1 Operating Voltage 3.3 Flash Memory 4 MB
- Add to cart
-
- Sale!
1240 12V DC 0.6A 7.5W Solenoid for Electric Door Lock
- Motors and Drivers, Modules, Sensor and Modules, Tools, Tools and Accessories
- Original price was: ₹499.00.₹349.00Current price is: ₹349.00. (inc. GST)
- Holding force: 0.25kg Energized forms: intermittent Unlocking time: 1S Dimensions: 54 x 42 x 28 mm (LxWxH) High quality ultra-compact electric lock. Rustproof, durable, safe, convenient to use. Suction which tightly sucks the iron, thus locking the door. Applicable for being installed in the escape door or fire door electronic controlled system.
- Add to cart
-
- Sale!
USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool
- Development Boards, Arduino Boards and Accessories, ESP Boards and Accessories, Raspberry Boards and Accessories
- Original price was: ₹689.00.₹549.00Current price is: ₹549.00. (inc. GST)
- Logical light indication: a small light indicate CHO electrical level. Input feature: 5PF,100K Ohm. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits 8-Channels USB logic analyzer with a 24Mhz sampling frequency Can analyze UART, IIC, and SPI, etc automatically Great for MCU, ARM system and FPGA development Voltage: 0-5.5V
- Add to cart
-
17HS4401S Stepper Motor Black Color Hybrid 4.2KGCM 1.5A with 1M Long Cable
- 3D Printer Parts, Motors and Drivers
- ₹699.00 (inc. GST)
- The 17HS4401S Stepper Motor is a Black Hybrid Stepper Motor with 4.2KGCM Torque and a Current of 1.5A with 1M Long Cable. This is best suited for 3D Printer ,Laser Engraver and other Projects
- Add to cart
-
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
- Sensor and Modules, Audio and Video, Buzzer and Speakers, Miscellaneous Module, Modules
- ₹75.00 (inc. GST)
- Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 30 mA Display Dimensions: 42x24x12 (LxWxH) mm
- Add to cart
-
- Out of StockSale!
Arduino Mega 2560 ATmega2560
- Development Boards, Arduino Boards and Accessories
- Original price was: ₹1369.00.₹1279.00Current price is: ₹1279.00. (inc. GST)
- Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed:…
- Read more
-
-
- Out of Stock
ADXL345 Tripple Axis Accelerometer Board
- Sensor and Modules, Acceleration & Rotation Sensor, Modules, Sensors
- ₹167.00 (inc. GST)
- Supply Voltage: 3.3V-5V. Interface Type: I²C, SPI. Sensing Range: ±2g, ±4g, ±8g, ±16g. Sensitivity: X: 28.6 LSB/g, Y: 31.2 LSB/g, Z: 34.5 LSB/g Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Read more
-
-
- Sale!
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
- Development Boards, Arduino Boards and Accessories
- Original price was: ₹199.00.₹149.00Current price is: ₹149.00. (inc. GST)
- based on STM32F103C8T6 Chip On board reset button On board Micro USB port for power input voltage 4.5V-15V. Power light indicator light Support SWIM debug mode.
- Add to cart
-
Digital Battery Capacity Checker for LiPo LiFe Li-ion Nicd NiMH
- Batteries and Accessories, Batteries BMS and Accessories
- ₹549.00 (inc. GST)
- Digital battery capacity check Cell Number: NiCd/NIMH (4-7 cells), Lithium type (2-7 cells) Battery Type: NiCd/NIMH, Li-Po, LiFe, Li-Ion Display Mode: battery cell voltages, total voltages, lowest cell voltage Highest cell voltage gap between highest cell voltage and lowest cell voltage, remaining battery capacity (%)
- Add to cart
-
XL7015 DC-DC Step Down Adjustable Power Supply Buck Module
- Buck Converter, Voltage Regulator Modules
- ₹99.00 (inc. GST)
- Input voltage range: 5V-80V DC Output voltage range: 1.5V-20V DC adjustable. Output current: 0-0.8A. High efficiency up to 90% Built-in thermal shutdown function Built-in current limit function Built output short protection function
- Add to cart
-
1000KV Step Up Power Module
- Voltage Regulator Modules
- ₹199.00 (inc. GST)
- Input Voltage: DC3.3V-5V Input Current: 2A-5A Output Voltage: DC 500KV-1000KV (Please pay attention to safety when used) Input Line Length: about 100mm (red is positive) Output Line Length: about 160mm
- Add to cart
-
- Out of Stock
30W LM2587 Step-Up Voltage Module DC-DC Power Module Boost Module
- Voltage Regulator Modules
- ₹299.00 (inc. GST)
- input Voltage Range : 3.5V to 30V Output Voltage Range: 4V to 30V Input Maximum Current : 5A Power : 30W Efficiency : 92% Operating temperature: -40 ℃ – 85 ℃ Load capacity: 80W (MAX) Mode of connection: Wiring terminals are free of soldering, IN is input, OUT is output. Suitable for 24V car or laptop power supply. Module size:…
- Read more
-
-
- Out of StockSale!
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
- Development Boards, Arduino Boards and Accessories, ESP Boards and Accessories, Raspberry Boards and Accessories, Tools, Tools and Accessories
- Original price was: ₹1999.00.₹1839.00Current price is: ₹1839.00. (inc. GST)
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen. Adjustable vertical displacement, and with instructions. With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any time waveform display (the HOLD function). Maximum Real-time Sampling Rate: 1Msps…
- Read more
-
-
- Out of Stock
DC12V 4-Wire PWM PC Fan Temperature Control Manumotive Fan Speed Controller Module CPU High-Temperature Alarm with Buzzer with NTC 3950 Thermistor
- Basic Components
- ₹399.00 (inc. GST)
- Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100%
- Read more
-
-
- Sale!
CN3791 9V MPPT Solar Charger Module
- Batteries and Accessories, Batteries BMS and Accessories, Miscellaneous Module, Modules, Sensor and Modules
- Original price was: ₹499.00.₹339.00Current price is: ₹339.00. (inc. GST)
- Input voltage: select the corresponding module according to the nominal voltage of the solar panel (9V) Output voltage: nominal 3.7V full charge voltage 4.2V lithium battery Interface: 2-pin JST connectors (or PH2.0) Max Charging current: 2A PWM switching frequency: 300KHz Charging voltage: 4.2V ± 1% Working environment temperature: -40 ° C to +85 ° C
- Add to cart
-
-
Sale!
NANO IO Shield Expansion Board For Arduino Screw Terminals
- Arduino Boards and Accessories, Development Boards, IC's and Base
- Original price was: ₹199.00.₹169.00Current price is: ₹169.00. (inc. GST)
- Compatible with Arduino NANO All digital and analog pins breakout Compact size; Leads all pins out, convenient for wiring and doing experiments.
- Add to cart
-
Sale!
-
- Sale!
neo 7m gps module
- Robot/Drone Parts, Acceleration & Rotation Sensor, Communication Module, Drone Kits, Modules, Ultrasonic & Proximity
- Original price was: ₹1499.00.₹549.00Current price is: ₹549.00. (inc. GST)
- This Ublox Neo 7M GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules. This Ublox Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings. Out of the box this GPS…
- Add to cart
-
L9110S Dual Channel H-Bridge Stepper Motor Driver Module
- Motors and Drivers
- ₹84.00 (inc. GST)
- Power supply voltage: DC2.5-12V Each channel has 800mA continuous current output Low saturation pressure drop TTL/CMOS output level compatible can be connected directly to the CPU Control and drive integrated into IC Have pin high-pressure protection function
- Add to cart
-
ESP8266 Adapter Plate Serial Wireless WIFI Module
- ESP Boards and Accessories
- ₹35.00 (inc. GST)
- It features reserved land-pattern for the 3.3V regulator It has Pinouts on the top layer in black color. Compatible with Latest ESP-12F ESP8266 Wifi Module It includes a 10K pull-up resistor populated on PCB.
- Add to cart
-
1602 LCD Board Keypad Shield Blue Backlight
- Development Boards, Arduino Boards and Accessories, Audio and Video
- ₹269.00 (inc. GST)
- Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a…
- Add to cart
-
- Out of Stock
Three-Way Soil Meter For Moisture, Light Intensity and pH Testing Meter
- Sensors, Temp, Humidity & Gas Sensor
- ₹349.00 (inc. GST)
- Three different soil test meters in one device; Measures moisture, pH/Acidity, and light. 100% Accuracy; Easy to read moisture, pH and light levels; Perfect monitor for growing healthy plants. Takes the guesswork out of gardening; Know exactly when to water, amend your soil or adjust lighting. Compact, portable & easy to use, just plug and use; Compact soil meter works…
- Read more
-
-
- Out of Stock
150 Watt Hot Melt Glue Gun with Temperature Control
- Tools, Tools and Accessories
- ₹649.00 (inc. GST)
- 150Watts Multi Temperature Glue Gun Temperature Control Between 100°C-220°C Non-drip Interchangeable Narrow Nozzle for Detailed Work LED INDICATOR Multiple Use Glue Gun Suitable For Glue Stick 11mm
- Read more
-
-
Raspberry Pi Pico
- Development Boards, Raspberry Boards and Accessories
- ₹345.00 (inc. GST)
- RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
- Add to cart
-
- Sale!
CJMCU MCP4725 I2C DAC Breakout Development Board
- Sensor and Modules, Development Boards, Modules
- Original price was: ₹299.00.₹209.00Current price is: ₹209.00. (inc. GST)
- 12-bit resolution Small package 2.7V to 5.5V supply Internal EEPROM to store settings I2C Interface (Standard, Fast, and High-Speed supported)
- Add to cart
-
NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
- Miscellaneous Module, Modules, Sensor and Modules
- ₹74.00 (inc. GST)
- Main chip: NE555 Input Voltage: 5V-15V DC. Generate an adjustable pulse for MCU. Generate an adjustable pulse, to control circuitry associated.
- Add to cart
-
Infrared IR Sensor Receiver Module for Arduino
- Sensor and Modules, Modules, Sensors, Ultrasonic & Proximity
- ₹59.00 (inc. GST)
- Dimension: 2.5 x 1.5 x 1.5 cm. Receiving angle: 90 °. Working voltage: 2.7 ~ 5.5V. Frequency: 37.9KHz Receiving range: 18m. Weight: 4 gm.
- Add to cart
-
- Out of Stock
5amp PWM DC Motor Speed Controller
- Basic Components
- ₹189.00 (inc. GST)
- Operating voltage: DC3V-35V Output current: 0-5A Output power: 90W (max) PWM cycle: 1% -100% PWM frequency: 10khz Size: 30mm x 24mm x 15mm (Without Handle)
- Read more
-
-
- Out of Stock
Copper clad plain printed circuit board 77mm x 52mm
- Tools and Accessories
- ₹24.00 (inc. GST)
- Copper clad coating PCB Dimension : 77mm x 52mm /7.7cm x 5.2cm Board thickness : 1 mm Circuit printing : single side High wear and tear properties Excellent heat resistance Ideal for prototyping.
- Read more
-
Shop
This is where you can browse products in this store.
