ST-Link V2 Mini STM8 STM32 Simulator Download Programmer
Original price was: ₹389.00.₹229.00Current price is: ₹229.00. (inc. GST)
In stock
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
Description
This is a Mini ST-LINK/V2 on a small single board. It is an extreme low cost solution for in-circuit debugger/programmer for STM8 and STM32 microcontrollers from ST Microelectronics. It is a toned down version of ST link V2 In line programmer/ debugger for STM8 and STM32 microcontrollers. It has USB 2.0 to connect to your PC and SWIM/SSD interface for communication with microcontrollers. It supports both 3.3V and 5V to easily connect the MCU. The U disk aluminum housing protects the simulator from static electricity and wear and tear due to rough use and provide protection against shocks, operational errors and malfunction.
Specifications
- Onboard 500mA self-recovery fuse to avoid short circuit
- Dual voltage output (3.3V/5V), easy for debugging and programming
- Standard USB interface for direct connection to PC
- Debugging: run at full-speed, single-stepped, breakpoints, viewing variables and registers, etc.
- Programming: supports FLASH ROM, EEPROM, AFR, etc.
- Automatically Upgradable firmware to support more devices
- Supported software: ST-LINK Utility v2.0, STVD Version 4.2.1, STVP Version 3.2.3, IAR EWARM, IAR EWSTM8 Revision v1.30, KEIL RVMDK Revision v4.21, ATOLLIC
- Supported devices: STM8 devices with SWIM interface and STM32 devices with SWD interface
Product Description
As is has a USB 2.0 port onboard so you can just plug it in the PC and download the programming or debugging software you are planning to use and start working on it. Make sure you connect the correct pins from the output port to the Microcontroller you are using.
Features :
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient, and practical!
- 5V and 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition!
- With 4 DuPont lines, so you can easily respond to different target board line orders!
- Use anti-static bag packaging.
-
SWIM-SPECIFIC FEATURES:
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- 1.65 V to 5.5 V application voltage supported on SWIM interface
- SWIM low-speed and high-speed modes supported
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
- SWIM cable for connection to the application
- Direct firmware update feature supported (DFU)
- Status LED which blinks during communication with the PC
- Operating temperature 0 to 50°C
Software Download Link:
https://www.st.com/en/development-tools/st-link-v2.html
Package Contents
1× ST-Link V2 Mini STM8 STM32 Simulator Download Programmer
4× Cover DuPont Cable
1 review for ST-Link V2 Mini STM8 STM32 Simulator Download Programmer
Only logged in customers who have purchased this product may leave a review.
Q & A
Refund and Returns Policy
Our refund and returns policy lasts 10 days from the date of delivery. If 10 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned.
- Gift cards
- Downloadable software products
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
Partial Refund
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
- Any item that is returned more than 10 days after delivery
Refunds
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at [email protected].
Late or missing refunds (if applicable)
Once refund is initiated you will get the refund initiated mail. after that wait for minimum 3 days.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next, contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at [email protected]
Sale Items
Only regular priced items may be refunded. Sale items cannot be refunded.
Exchanges
We only replace items if they are defective or damaged(during shipping) please take the photo if package is tempered or damage at the time of receiving goods . If you need to exchange it for the same item, send us an email at [email protected] and send your item to: M/S Rytronics Enterprises, Plot GH-05B Greater noida west Sector, 201306 (UP).
Shipping returns
To return your product, you should mail your product to: M/S Rytronics Enterprises, Plot GH-05B, Greater noida west Sector, 201306 (UP).
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are returning more items value more then Rs 2000, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Need help?
Contact us at [email protected] for questions related to refunds and returns.
You may also like…
-
- Sale!
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
- Development Boards, Arduino Boards and Accessories
- Original price was: ₹199.00.₹149.00Current price is: ₹149.00. (inc. GST)
- Add to cart
Ajay Rayabarapu (verified owner) –
The product you supplied is not responding to computer and I have asked for replacement, but I didn’t get any reply
Please look into the matter and resolve the issue