-
SK8 8MM linear bearing rail support XYZ Shaft Table CNC Router SH8A – 2Pcs
- 3D Printer Parts
- ₹139.00 (inc. GST)
- Model description: SK8 Shaft ID: 8mm Dimensions: 14 x 42 x 32 (LxWxH) mm Mounting Hole Diameter: Approx. 5.5 mm Center Hole Distance: Approx. 32 mm
- Add to cart
-
- Out of Stock
GY-273 HMC5883L Module Triple Axis Compass Magnetometer Sensor
- Sensor and Modules, Miscellaneous Module, Modules, Other Sensors, Sensors
- ₹209.00 (inc. GST)
- Read more
-
-
YZC-133 Weighing Load Cell Sensor 10kg For Electronic Weighing Scale
- Sensor and Modules, Force & Pressure Sensor, Miscellaneous Module, Sensors
- ₹219.00 (inc. GST)
- Model: YZC-133 Rated Output:1.0 ± 0.1mV / V Non Linear Output:± 0.03% F.S Impedance (Ω):1115±10% Ω
- Add to cart
-
- Sale!
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
- Temp, Humidity & Gas Sensor
- Original price was: ₹119.00.₹99.00Current price is: ₹99.00. (inc. GST)
- Using high-quality dual-panel design, with power indicator and TTL signal output instructions. The switching signal having a DO (TTL) output and analog output AO. TTL output valid signal is low. The higher the voltage, the concentration of the analog output voltage is higher. A hydrogen gas detection with good sensitivity. Has a long life and reliable stability
- Add to cart
-
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
- Arduino Boards and Accessories, Development Boards
- ₹1399.00 (inc. GST)
- Microcontroller CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA Dimensions : 111 x 54 x 12 (LxWxH) mm.
- Add to cart
-
- Out of Stock
Third Hand Tool with Magnifying Glass
- Tools, Tools and Accessories
- ₹398.00 (inc. GST)
- Fixing elements in the form of spring-loaded clips. Magnifying glasses facilitate observation of the operation field. Adjustment of fixation height, spacing, angle and magnifying glass. Position system of double articulated arms
- Read more
-
-
SHARP GP2Y1014AU0F Dust Sensor Module
- Sensors, Health Sensor, Sensor and Modules, Temp, Humidity & Gas Sensor, Water & Environment Sensor
- ₹409.00 (inc. GST)
- Power Supply: DC5 ± 2V Sensitivity Range: 0.5V / (0.1mg / m3) Clean air voltage: 0.9V typ. Detects dust by the photometry of only one pulse Used in dust removal equipment alarm equipment, air purification equipment, dust robots, fire alarm, etc. dust sensor | smoke sensor | air sensor
- Add to cart
-
GY-30 BH1750FVI Digital Light Intensity Illumination Sensor
- Sensor and Modules, Sensors, Ultrasonic & Proximity, Voltage & Current Sensor
- ₹145.00 (inc. GST)
- High precision determination accurate to 1 Lu for different lights Operating Voltage: 3-5VDC Built-in 16bit A/D converter I2C interface
- Add to cart
-
Infrared IR Wireless Remote Control Module Kit for Arduino
- Miscellaneous Module
- ₹69.00 (inc. GST)
- Battery: CR2025 160mAh button battery Effective angle: 60° Sticking material: 0.125mmPET Effective life: 20,000 times Static current: 3uA – 5uA Dynamic current: 3mA – 5mA
- Add to cart
-
- Out of Stock
1000 watt 2SC5200 Amplifier board with bass treble Preinstalled Electronic Components
- Audio and Video, Amplifiers and Sound Cards
- ₹1279.00 (inc. GST)
- Powerful 200 watt output with 2SC5200 amplifier Preinstalled Bass Treble Board for precise frequency control High-quality electronic components for reliable performance Enables immersive and high-fidelity audio experiences
- Read more
-
-
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
- Motors and Drivers, Motors
- ₹129.00 (inc. GST)
- Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm
- Add to cart
-
- Out of StockSale!
(D69-2058) Multi-function Digital Meter (6 in 1)
- Voltage Regulator Modules, Batteries BMS and Accessories, Display Module
- Original price was: ₹1848.00.₹1499.00Current price is: ₹1499.00. (inc. GST)
- AC voltage: AC 40.0-300.0V AC current: AC 0-99.99A, minimum resolution is 0.01A AC current: AC 0-40.00A, minimum resolution is 0.01A power frequency: 45.0Hz-65.0Hz power factor : 0.00-1.00PF
- Read more
-
-
- Out of StockSale!
Raspberry Pi 4 Model-B with 8 GB RAM
- Development Boards, Raspberry Boards and Accessories
- Original price was: ₹12390.00.₹7999.00Current price is: ₹7999.00. (inc. GST)
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power 5V@3A via USB Type-C port Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
- Read more
-
-
- Sale!
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
- Sensor and Modules, Sensors, Voltage & Current Sensor
- Original price was: ₹299.00.₹119.00Current price is: ₹119.00. (inc. GST)
- 0.1 ohm 1% 2W current sense resistor Up to +26V target voltage Up to ±3.2A current measurement, with ±0.8mA resolution Senses Bus Voltages from 0 to 26 V 2C- or SMBus-compatible interface. The Reports Current, Voltage, and Power.
- Add to cart
-
USB Blaster ALTERA CPLD/FPGA Programmer
- Development Boards, Arduino Boards and Accessories
- ₹269.00 (inc. GST)
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc. Enhanced configuration devices: EPC1, EPC4. Supports 3 download mode: AS, PS and JTAG.
- Add to cart
-
- Sale!
12V Mini Portable Handheld Compact Electric Drill and Grinder mini hand drill micro-drill Electric grinding
- Basic Components
- Original price was: ₹1999.00.₹1349.00Current price is: ₹1349.00. (inc. GST)
- Rated Torque:530g/cm Max. Drilling Diameter:3.0 mm Rated Input Power:1A DC-12V Rated Voltage:AC 220v to DC12v No-Load Speed:12000/rpm Weight:0.8KG
- Add to cart
-
- Sale!
CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino
- Sensor and Modules, Acceleration & Rotation Sensor, Sensors, Ultrasonic & Proximity
- Original price was: ₹299.00.₹149.00Current price is: ₹149.00. (inc. GST)
- Working voltage:2.8-3.8V ALS, IR LED and Proximity Detector in an Optical Module; Ambient Light Sensing (ALS); Approximates Human Eye Response; Programmable Interrupt Function with Upper and Lower Threshold; Up to 16-Bit Resolution; High Sensitivity Operates Behind Darkened Glass; Low Lux Performance at 0.01 lux;
- Add to cart
-
- Sale!
5v-30v micro usb power adjustable delay relay timer control module trigger delay switch
- Switches & Relays, Voltage & Current Sensor, Voltage Regulator Modules
- Original price was: ₹199.00.₹149.00Current price is: ₹149.00. (inc. GST)
- Wide voltage 5V-30V Time can be adjusted via a potentiometer, meeting your most occasions Micro USB 5.0V power supply with input, easy to use 5–30V wide supply voltage External triggering and onboard buttons Two triggering methods With a relay pull-in indicator Interference ability, under various interference will not malfunction relay for industrial control.
- Add to cart
-
Raspberry Pi 4 Black Compact ABS Case
- Raspberry Boards and Accessories
- ₹179.00 (inc. GST)
- Only 3-piece ABS case with access to all Ports on pi 4 Compatible for All variants of the Raspberry pi 4 Model B Easy to assemble and highly durable material Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel locking screw holes and anti-slip rubber feet at the back.
- Add to cart
-
Raspberry Pi 4 Transparent Compact ABS Case with Cooling FAN Slot
- Raspberry Boards and Accessories
- ₹179.00 (inc. GST)
- Only 3-piece ABS case with access to all Ports on pi 4 Compatible for All variants of the Raspberry pi 4 Model B Easy to assemble and highly durable material Cut-out for micro SC card at the bottom panel locking screw holes and anti-slip rubber feet at the back.
- Add to cart
